The Volvo EC300E and Hitachi ZX300-6 are among the most capable 30-tonne excavators available in the European secondhand market. They are frequently listed within the same search results, often at similar prices, and they’re both used extensively in the same applications: large trenching, foundation digging, infrastructure construction, and heavy earthmoving.
Unlike the Cat 320 vs PC300 comparison, this is a genuine size-class match. You’re comparing two machines doing the same job, and the differences are technical and commercial rather than fundamental. This makes the comparison more useful — and the decision harder.
The Volvo EC300E is Volvo CE’s flagship in the 30-tonne class. It was designed with a focus on fuel efficiency and operator productivity, and it introduced Volvo’s ECO mode and Intelligent Boom Control system. Volvo CE machines have a strong following in the Dutch civil construction sector — partly because Volvo has been part of the European market since before many competitors entered it.
The Hitachi ZX300-6 is Hitachi Construction Machinery’s 30-tonne offering in their Zaxis-6 generation. Hitachi machines are known for their hydraulic system performance — particularly the ZX300’s main control valve responsiveness and multi-function hydraulics. In demanding applications requiring simultaneous bucket, boom, and travel operations, experienced operators frequently rate Hitachi’s hydraulic feel above Volvo’s.
Headline specs
- Operating weight: EC300E 29,700–31,200 kg · ZX300-6 28,900–30,700 kg
- Engine power: EC300E 204 hp (152 kW) · ZX300-6 204 hp (152 kW)
- Max dig depth: EC300E 7.17 m · ZX300-6 7.02 m
- Max reach at ground level: EC300E 10.55 m · ZX300-6 10.12 m
- Bucket capacity (std): EC300E 1.19–1.6 m³ · ZX300-6 1.0–1.4 m³
- Swing torque: EC300E 92 kN·m · ZX300-6 88 kN·m
- Fuel consumption (typical): EC300E 20–24 L/hr · ZX300-6 19–23 L/hr
Both machines run 204 hp engines with comparable hydraulic flow rates. But hydraulic system character differs in ways that matter on site.
Volvo’s EC300E uses their Load Sensing Hydraulic (LSH) system with Electric Control Hydraulics (ECH). The system is well-calibrated for smooth, predictable operation — it’s easy to operate accurately, and Volvo’s Intelligent Boom Control (IBC) reduces boom over-swing at the end of a digging stroke, which reduces operator fatigue on long shifts.
Hitachi’s ZX300-6 uses HIOS III (Hitachi Integrated Operating System). Experienced operators often describe Hitachi’s hydraulic response as “crisper” — faster main valve response, better multi-function simultaneous operation. This matters in applications where you’re constantly combining boom down, arm curl, and bucket close in the same stroke (typical in structured digging patterns). The trade-off is that the Hitachi requires slightly more operator skill to operate smoothly.
For fleet owners with experienced operators doing infrastructure work: the Hitachi is frequently the preferred machine on performance grounds. For fleet owners hiring a mix of operator experience levels: the Volvo’s more forgiving system may reduce operating errors and fatigue.
“Put a seasoned operator in a ZX300 and time the loading cycle — it’s consistently two to three seconds faster per bucket than the EC300 in structured trench work. That adds up to 30–40 extra loads per shift. But give the same machines to a less experienced crew and the Volvo wins on fewer mistakes and less rework.”
These two machines trade at similar prices in the Dutch and German markets. There is no consistent premium for either brand — both are well-regarded and both have strong secondary demand.
- Volvo EC300D/E (2013–2016, ~8,000 hrs): €130,000–€160,000
- Volvo EC300E (2017–2021, ~4,500 hrs): €175,000–€215,000
- Hitachi ZX300-5/6 (2013–2016, ~8,000 hrs): €125,000–€155,000
- Hitachi ZX300-6 (2017–2021, ~4,500 hrs): €170,000–€210,000
At any given age and hours, you can typically find a Hitachi ZX300 slightly cheaper than a comparable Volvo EC300. This is primarily a liquidity effect — there are more Volvo-brand buyers in NL/BE, which supports Volvo resale prices. Ritchie Bros. European auction data from 2024–2025 shows Volvo excavators in the 25–35 tonne class averaging 6–8% higher hammer prices than equivalent Hitachi models at comparable hours. For buyers who plan to keep the machine long-term (5+ years), this difference is less relevant. For those planning a 3-year cycle, the Volvo’s resale advantage may recover part of the initial price difference.
Both machines have good reliability records in the European market. The following are known watch-points when buying secondhand, based on what NL dealers most commonly flag in pre-sale inspections:
Volvo EC300: Check the boom cylinder seals on machines with over 8,000 hours — wear patterns on the EC300E can accelerate if the machine has worked in abrasive conditions. The upper structure swing bearing should be inspected carefully on any machine with high swing cycle applications (such as heavy demolition or side-casting work). Turbocharger condition on older C-series engines (pre-E) can be variable.
Hitachi ZX300: The main hydraulic pump on high-hour ZX300 machines deserves specific attention — Hitachi pumps are generally durable but can show reduced performance if service intervals were missed. The ZX300-6 improved cooling system design over the ZX300-5; if buying a -5, check cooling system condition carefully if the machine worked in summer conditions with high ambient temperatures.
“On the EC300E, the boom cylinder seal issue is real — we replace seals on about one in three machines that come through with over 8,000 hours. It’s a half-day job if you catch it early, but if the rod is scored from running on bad seals, you’re looking at a new cylinder at three to four thousand euros. Always check for weeping at the gland nut.”
Volvo CE has arguably the strongest dealer network in the Netherlands, with Swecon/Vostermans covering most of the country and strong parts stocking levels. The EC300 is a high-volume machine for Volvo, which means independent service providers have deep experience with it.
Hitachi is distributed through Moritzburgring NL and official Hitachi dealers in Belgium. The network is smaller than Volvo’s but well-regarded for technical competence. In Germany, Hitachi has stronger independent dealer coverage — useful if the machine will work across borders.
For buyers based in NL/BE who want maximum service optionality: Volvo has an edge. For buyers with projects in NL and DE who may need service in both markets: the difference is less clear-cut. According to CECE industry reports, cross-border equipment utilisation in the Benelux-Germany corridor has increased by approximately 18% since 2020, making dual-market service access an increasingly relevant purchasing criterion.
Buy the Volvo EC300E if:
- Your operators have mixed experience levels and you want a forgiving, easy-to-operate machine
- You’re based in the Netherlands and want the most service options and resale liquidity
- You plan to sell within 3–5 years and want strong secondhand demand
- Operator comfort and reduced fatigue on long-cycle work is a priority
Buy the Hitachi ZX300-6 if:
- Your operators are experienced and value hydraulic responsiveness over forgiveness
- You’re doing structured excavation work requiring precise multi-function hydraulics
- You want the best value per euro at equivalent hours and age
- You have projects in Germany and want better cross-border service coverage